Front I/O Panel Housing Assembly
1.Prepare the computer for disassembly (Preparation for Disassembly on page 59)
2.Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Access Panel on page 60)
3.Remove the front bezel (Front Bezel on page 61)
4.Free the two cables from the cable tie that is attached to the chassis.
5.Remove the screw (1) that secures the housing to the chassis and then rotate the housing away from the chassis and pull the assembly out of the chassis.
To install the housing assembly, reverse the removal procedures.
76 Chapter 7 Removal and Replacement Procedures— Microtower (MT) Chassis | ENWW |