HP DX2250 Computer Setup—StandardCMOS Features

Computer Setup—Standard CMOS Features

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 2-3Computer Setup—Standard CMOS Features

OptionDescription

Date (mm:dd:yy)	Allows you to set system date.
Time (hh:mm:ss)	Allows you to set system time.
PATA Controller	Disables/enables PATA Controller.
PATA Channel 0 Master	For each, if PATA HDD is used, allows you to:
PATA Channel 0 Slave	● run HDD self-test for selected channel:
		●	SMART Status Check
		● HDD Short Self-Test
		● HDD Extended Self-Test
	● set PATA Ch 0 Master/Slave device details on selected channel to:
		●	Auto
		●	Manual
	● set access mode on selected channel to:
		● CHS (Cylinder-Head-Sector)
		● LBA (Logical Block Addressing)
		●	Large
		●	Auto
	●	view:
		●	Firmware Version
		●	Capacity
		●	Cylinder
		●	Head
		●	Precomp
		●	Landing Zone
		●	Sector
SATA Controller	Disables/enables onboard SATA controller.
SATA Mode	Allows you to set the onboard SATA mode to:
	●	Native IDE
	●	Legacy IDE

6 Chapter 2 Computer Setup (F10) Utility ENWW