Installing the Adapter
Installation Prerequisites
Before you begin, make sure you have the following:
■A screwdriver (Phillips #1).
■An optical multimode cable with an
■Each HBA has a unique serial number that is located on the bottom of the adapter. Check the HBA and record its serial number, in the unlikely event that the NVRAM is corrupted.
Adapter Components
Figure 1 shows the HBA components that are referenced throughout this chapter.
3
1
2
1. | LED Indicators | 3. J3 Jumpers |
2. | J1 Connector |
|
Figure 1: Adapter Components
18FCA2214/FCA2214DC
