Extended Firmware Settings | HP FCA2214DC I-X specs

Fast!UTIL

Extended Firmware Settings

From the Configuration Settings menu in Fast!UTIL, select Extended

Firmware Settings. Table 8 lists the default settings for the HBA:

Table 8: Extended Firmware Settings

Setting	Options	Default
Extended Control Block	Enabled, Disabled	Enabled

RIO Operation Mode	0, 1, 2, 3, 4	0

Connection Options	0, 1, 2	2

Class 2 Service	Enabled, Disabled	Disabled

ACK0	Enabled, Disabled	Disabled

Fibre Channel Tape Support	Enabled, Disabled	Enabled

Fibre Channel Confirm	Enabled, Disabled	Enabled

Command Reference Number	Enabled, Disabled	Disabled

Read Transfer Ready	Enabled, Disabled	Disabled

Response Timer	0–255	0

Interrupt Delay Timer	0–255	0

Data Rate	0, 1, 2	2

48FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation Guide

Image 48

HP FCA2214DC I-X manual Extended Firmware Settings, Firmware Settings. lists the default settings for the HBA

Contents

Hp StorageWorks FCA2214/FCA2214DC PCI-X Host Bus Adapters For Linux, NetWare, and WindowsPage Contents Installing the NetWare Driver Figures Contents About this Guide Overview Intended AudienceRelated Documentation Text symbols ConventionsDocument conventions Equipment symbols About this Guide Getting help HP technical supportHP storage web site HP authorized reseller Adapter Features Adapter Features Environmental Specifications Adapter Specifications Type Specification Installing the Adapter Refer to your host documentation for installing the HBA Installation Prerequisites Adapter Components LED Indicators Before You Begin Installation Jumpers Installing the Adapter Installation Considerations Installing the Linux Driver Installing the Driver Building a Driver from the Sources Building a Multiprocessor Version of the Driver Installing the Driver on the Boot Drive Loading the Driver For example Loading and Unloading the qla2300 Driver Manually System Driver Parameter maxscsiluns Append=maxscsiluns=128 Driver Command Line Parameters Proc Filesystem Support Installing the Windows Driver Installing a New Windows Driver Following message displays Following message displays Choose Start Settings Control Panel System Updating an Existing Windows Driver Installing the NetWare Driver NetWare Driver Files and Parameters, Installing the Driver, NetWare Driver Files and Parameters Parameter Description Choose Configure disk and storage device drivers Load QL2300.HAM Load NWASPI.CDM Troubleshooting6 Hardware Problem Checklist System Configuration Problems Fibre Channel Problem Checklist Troubleshooting Fast!UTIL Configuration Settings Host Adapter Settings Selectable Boot Settings Restore Default SettingsAdvanced Adapter Settings Raw Nvram Data Setting Options Default Fast!UTIL Extended Firmware Settings Firmware Settings. lists the default settings for the HBA Connection Options Type of Connection Scan Fibre Channel Devices Fibre Disk UtilitySelect Host Adapter Regulatory Compliance Notices Federal Communications Commission Notice Class a Equipment Modifications Network and Serial CablesCanadian Notice Avis Canadien Class a Equipment Japanese Notice Japanese Class a Notice Laser Safety Warnings Laser DevicesCompliance with Cdrh Regulations Compliance with International Regulations Regulatory Compliance Notices Electrostatic Discharge Grounding Methods Index Index Index Index