Installing the NetWare Driver
12.Choose Select/Modify Driver Parameters and enter the slot number. If you have only one HBA in your server, this parameter is ignored. However, you must specify a valid number during installation.
Other driver parameters can be changed at this point. For the MSA1000, you should not change any of the parameters listed in Table 5, except the values for PORTDOWN and MAXLUNS to fit your environment. Please refer to the README.txt file that came with the driver for a complete explanation of all driver parameters.
13.Press F10 to save the parameter settings.
14.Choose Save parameters and load driver to complete the NetWare setup.
15.Exit the installation program.
Note: If ASPI support is required for the SCSI devices, you must load the
NWASPI.CDM module, which is provided by Novell. For example, enter:
LOAD QL2300.HAM
LOAD NWASPI.CDM
38FCA2214/FCA2214DC
