HP FCA2214 manual Updating an Existing Windows Driver, Choose Start Settings Control Panel System

Installing the Windows Driver

Updating an Existing Windows Driver

Note: For the FCA2214DC, the Windows Device Manager detects and displays two instances of the HBA. You must install the driver for each instance. Therefore, for the FCA2214DC, you must perform the following steps twice, once for each instance of the HBA displayed by the Device Manager.

Perform the following steps to update the Windows driver:

1.Choose Start >Settings > Control Panel >System.

2.Choose the Hardware tab, then click Device Manager.

3.Scroll down through the hardware types and select SCSI and RAID controller.

4.Choose FCA2214 PCI Fibre Channel Adapter fromthe device list, then click Properties.

5.Click the Driver tab, then click Update Driver to start the Upgrade Device Drier Wizard. Click Next.

6.Select Display a list of the known devcie drivers for this device so that I can choose a specific driver. Click Next.

7.Insert the FCA2214/FCA2214DC CD-ROM and click Have Disk.

8.Enter the CD-ROM’s drive letter on the Copy manufacturer’s file from screen.

9.Click Next on the Select a Device Driver and the Start Device Driver Installation screens.

10.Click Finish on the Completing the Upgrade Device Driver screen.

The following message displays:

Your hardware settings have changed. You must restart your computer for these changes to take effect. Do you want to restart your computer now?

11. Click Yes.

34FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation Guide