HP FP9419 manual Connecting the Monitor, Connecting the VGA Cable

Setting Up the Monitor

Connecting the Monitor

To connect the monitor video input to the computer:

1.Place the monitor upright as shown in the following illustration.

2.Connect the video cable from the monitor to the video connector on the rear panel of the computer.

✎You can connect the VGA cable, the DVI-D cable, or both. Only one cable is connected for typical installations.

❏Connect one end of the 15-pin VGA cable to the VGA input connector on the monitor. Then connect the other end to the VGA output connector on the computer.

VGA

TV-OUT LCD

Connecting the VGA Cable

User’s Guide 3–7