HP GRACO OR PRO TI1681A manual Select a Fluid Nozzle and Air Cap, Fluid Nozzles, Air Caps

Installation

Select a Fluid Nozzle and Air Cap

WARNING

Pressurized Equipment Hazard

To reduce the risk of an injury, follow the Pressure Relief Procedure on page 20 before removing or installing a fluid nozzle and/or air cap.

The gun is supplied with Part No. 197266 Nozzle and 197477 Air Cap. If you require a different size, refer to Table 1 and Table 2 , and instruction manual 309419, or consult with your Graco distributor. See Air Cap/Nozzle Replacement on page 42.

Table 1: Fluid Nozzles

Part No.	Size,	Part No.	Size,
	mm (in.)		mm (in.)
197263	0.75 (.030)	197266	1.5 (.055)
197264	1.0 (.042)	197267	1.8 (.070)
197265	1.2 (.047)	197268	2.0 (.080)

Table 2: Air Caps

	Pattern Shape	Recommended Fluids and
Part No.	and Length
		Production Rates
	in. (mm)
197477	Round end;	Light to medium viscosity.
	15-17 (381-432)	Medium to high production.
197478	Round end;	Light to medium viscosity.
	15-17 (381-432)	Low to medium production.
197479	Tapered end;	Light to medium viscosity.
	13-15 (330-381)	Medium to high production.
	Round end;	Medium to high viscosity
197480		and high solids.
	16-18 (406-457)
		Low to medium production.
		Medium to high viscosity
197481	Tapered end;	and high solids.
	17-19 (432-483)	Medium to high production.
		For use with 2.0 mm nozzle.

16 309293J