Technical Data

Category

Maximum Working Fluid Pressure

Maximum Working Air Pressure

Minimum Air Pressure at Gun Inlet

Maximum Fluid Operating Temperature

Short Circuit Current Output

Voltage Output Energy

Sound Power (measured per ISO Standard 9216)

Sound Pressure (measured 1 m from gun)

Gun Air Inlet Fitting, left-hand thread

Gun Fluid Inlet Fitting

Gun Weight

Gun Length

Isolation Enclosure Air Inlet Fitting

Isolation Enclosure Fluid Inlet Fitting

Isolation Enclosure Weight

Isolation Enclosure Height

Isolation Enclosure Width

Isolation Enclosure Depth

Wetted Parts

Technical Data

Data

100 psi (0.7 MPa, 7 bar)

100 psi (0.7 MPa, 7 bar)

40 psi (0.28 MPa, 2.8 bar)

120°F (48°C)

125 microamperes

.35 J with fluid hose 246431 installed 244581, 245301: 60 kV

244582, 245305: 30-60 kV

at 40 psi (0.28 MPa, 2.8 bar): 90.4 dB(A)

at 100 psi (0.7 MPa, 7 bar): 105.4 dB(A)

at 40 psi (0.28 MPa, 2.8 bar): 87 dB(A)

at 100 psi (0.7 MPa, 7 bar): 99 dB(A) 1/4 npsm(m)

custom inlet for Graco waterborne fluid hose

27.8oz (788 g)

11.1in. (28.2 cm) 1/4 npt

3/8 in. OD tube fitting 125 lb (56.3 kg)

44 in. (1118 mm)

24 in. (610 mm)

29 in. (737 mm)

Gun: Stainless Steel; Nylon, Acetal, Ultra-High Molecular

Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten

Wire, Polyethylene

Waterborne Fluid Hose: PTFE

Suction Tube: Polyethylene, Stainless Steel

Triton Pump: See manual 309303

Loctite® is a registered trademark of the Loctite Corporation.

309293J

69