For information about registering licenses, see the following documents:
•HP OpenVMS License Management Utility Manual
•HP OpenVMS Version
•HP Operating Environments for OpenVMS for Integrity Servers Software Product Description (SPD 82.34.xx).
To register licenses, use the OpenVMS License utility as follows:
1.Start the OpenVMS License utility by entering the following command at the OpenVMS system prompt. (You can also use the LICENSE REGISTER command.)
$ @SYS$UPDATE:VMSLICENSE
2.The utility displays a menu screen similar to the following. Select the REGISTER option (press Enter or enter 1 at the prompt), and enter each license key until you have successfully registered all required PAKs.
VMS License Management Utility Options:
1.REGISTER a Product Authorization Key
2.AMEND an existing Product Authorization Key
3.CANCEL an existing Product Authorization Key
4.LIST Product Authorization Keys
5.MODIFY an existing Product Authorization Key
6.DISABLE an existing Product Authorization Key
7.DELETE an existing Product Authorization Key
8.COPY an existing Product Authorization Key
9.MOVE an existing Product Authorization Key
10.ENABLE an existing Product Authorization Key
11.SHOW the licenses loaded on this node
12.SHOW the unit requirements for this node
99. Exit this procedure
Type '?' at any prompt for a description of the information requested. Press Ctrl/Z at any prompt to return to this menu.
Enter one of the above choices [1]
3.After each license is successfully registered, the procedure asks whether the license should be loaded. Answer YES.
4.After you have registered and loaded all your licenses, exit the License Management procedure by entering option 99.
7.4Set System Parameters for Volume Shadowing (New Installations Only; Optional)
If you plan to form a shadowed system disk, you must add system parameters to the SYS$SYSTEM:MODPARAMS.DAT file. Add the following lines to the bottom of the MODPARAMS.DAT file:
SHADOWING=2 SHADOW_SYS_DISK=1 SHADOW_SYS_UNIT=n SHADOW_MAX_COPY=4 ALLOCLASS=x
!Enable volume shadowing
!Enable shadowing of the system disk !Optional: default is 0, which creates DSA0
!Allow up to 4 shadow copies or merges going on at the same time !This number must be
!it must be used if local
If a nonzero ALLOCLASS value is already in use for your system, do not change the ALLOCLASS value. For more information about these and other system parameters you can set for volume shadowing, see the HP Volume Shadowing for OpenVMS manual. For more information about setting ALLOCLASS for clusters, see the HP OpenVMS Cluster Systems manual.
7.4 Set System Parameters for Volume Shadowing (New Installations Only; Optional) 117