HP OpenVMS 8.x manual Examining Your Command Procedures Upgrades Only

system problems, and so forth. A template file is provided by the operating system. To create your own SYS$WELCOME file, do the following:

1.Copy the template file using the following command:

$ COPY SYS$MANAGER:WELCOME.TXT SYS$SPECIFIC:[SYSMGR]WELCOME.TXT

For a clusterwide welcome message, you can copy the file to SYS$COMMON:[SYSMGR].

2.Replace the text in SYS$SPECIFIC:[SYSMGR]WELCOME.TXT with text specific to your system.

3.Edit SYS$MANAGER:SYSTARTUP_VMS.COM to remove the exclamation point (!) from the line that defines SYS$WELCOME.

If you do not want to use a node-specific welcome file, you can optionally define the logical in SYS$MANAGER:SYSTARTUP_VMS.COM to display a message, such as in the following example:

$ DEFINE SYS$WELCOME “Welcome to node HOMER”

For more information about creating login welcome messages, see the HP OpenVMS System Manager's Manual, Volume 1: Essentials.

7.10 Examining Your Command Procedures (Upgrades Only)

The upgrade procedure retains the site-specific versions of the following files located in the [VMS$COMMON] directory:

•[SYSMGR]LAT$SYSTARTUP.COM

•[SYSMGR]LOGIN.COM

•[SYSMGR]SYCONFIG.COM

•[SYSMGR]SYLOGICALS.COM

•[SYSMGR]SYLOGIN.COM

•[SYSMGR]SYPAGSWPFILES.COM

•[SYSMGR]SYSECURITY.COM

•[SYSMGR]SYSHUTDWN.COM

•[SYSMGR]SYSTARTUP_VMS.COM

•[SYSMGR]TFF$SYSTARTUP.COM

•[SYSMGR]WELCOME.TXT

•[SYS$STARTUP]ESS$LAST_STARTUP.DAT

The upgrade procedure might provide new templates for some of these files with the .TEMPLATE file extension. The new templates might include features that are not in your site-specific files. Check the templates against your site-specific files and edit your files as necessary.

NOTE: As of Version 8.3 of OpenVMS, the DCL command DECRAM has been removed because it conflicts with the new DECRYPT command (DECRYPT overwrites the default definition of DECR, which you might have been using to run DECram). You should update any command procedures that use the DECRAM command so that they use the foreign command style of DCL to run DECRAM:

$ DECRAM == "$MDMANAGER"

This change affects only the use of the DCL command; all other aspects of the DECram product remain the same.

7.11 Adding and Removing Operating System Files (Optional)

If you decide after the installation or upgrade to change which OpenVMS operating system files you want installed on your system, you can use the menu system contained on the OpenVMS operating system media to add or remove files.

136 After Installing or Upgrading the OpenVMS Operating System