HP P2030 manual Jobs, Information pages on page 56. Verify that the name, IP

The printer driver does not automatically set up your selected product in Print Center.

Cause Solution

The product might not be ready.

Make sure that the cables are connected correctly, the product is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.

The interface cable might be defective or of poor quality.

Replace the interface cable. Make sure to use a high-quality cable.

A print job was not sent to the product that you wanted.

Cause	Solution
The print queue might be stopped.	Restart the print queue. Open print monitor and select Start
	Jobs.
The wrong product name or IP address is being used. Another	Check the product name, IP address, or Rendezvous host
product with the same or similar name, IP address, or	name by printing a configuration page. See Print the
Rendezvous host name might have received your print job.	information pages on page 56. Verify that the name, IP
	address, or Rendezvous host name on the configuration page
	matches the product name, IP address, or Rendezvous host
	name in the Print Center.

An encapsulated PostScript (EPS) file does not print with the correct fonts.

Cause Solution

This problem occurs with some programs.

●Try downloading the fonts that are contained in the EPS file to the product before printing.

●Send the file in ASCII format instead of binary encoding.

You are unable to print from a third-party USB card.

Cause Solution

This error occurs when the software for USB devices is not installed.

When adding a third-party USB card, you might need the Apple USB Adapter Card Support software. The most current version of this software is available from the Apple Web site.

ENWW Solve common Macintosh problems 105