HP Pro 110 manual Computer Setup-Advanced, Computer Setup-Power

Computer Setup—Advanced

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.

Table 3-2Computer Setup—Advanced

Option	Description
CPU Type	(view only)
CPU Speed	(view only)
Cache RAM	(view only)
Supervisor Password	Allows you to establish, disable, or change the supervisor password.
User Password	Allows you to establish, disable, or change the user password.
	NOTE: Only displays if a Supervisor password is set.
Onboard LAN	Allows you to disable/enable onboard LAN controller. Default is enabled.
Onboard WLAN	Allows you to disable/enable onboard WLAN controller. Default is enabled.
Onboard LAN Boot	Allows you to disable/enable the boot ROM of the onboard LAN chip. Default is enabled.
ROM
Onboard 1394	Allows you to enable/disable all 1394 ports. Default is enabled.
Primary Video Adapter	Allows you to select the boot display device when more than 2 video options are offered by the
	system:
	●	Integrated (Onboard)
	●	PCI-E
SATA Controller	Allows you to disable/enable the SATA controller. Default is enabled.
SATA Controller Mode	If SATA Controller is enabled, allows you to set the mode to:
	●	IDE
	●	AHCI (default)
Onboard Audio	Allows you to set the onboard audio to:
	●	Auto (default)
	●	Disabled
	●	Enabled
USB Ports	Allows you to individually disable/enable USB ports. Default is enabled.
Change Supervisor	Allows you to change the supervisor password. Press Enter to change the password. Press Enter
Password	again to disable the password.

Computer Setup—Power

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Computer Setup (F10) Utilities 9