System Board Shield
The system board shield sits above the system board. It is secured with two screws. To remove the system board shield:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Remove the small rear cover (see Small Rear Cover on page 28).
3.Remove the stand (see Stand on page 29).
4.Remove the right rear cover (see Right Rear Cover on page 35).
5.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
6.Remove the rear cover (see Rear Cover on page 46).
7.Remove the two screws (1) that secure the shield to the computer.
8.Rotate the shield from left to right to remove it from the computer (2). Figure
To install the system board shield, reverse the removal procedures.
System Board Shield 51
