Power Button Board
Description | Spare part number |
|
|
Power button board |
|
|
|
The power button board is mounted on the left side of the computer. It is secured with two screws and has one connector.
To remove the power button board:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Remove the small rear cover (see Small Rear Cover on page 28).
3.Remove the stand (see Stand on page 29).
4.Remove the right rear cover (see Right Rear Cover on page 35).
5.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
6.Remove the rear cover (see Rear Cover on page 46).
7.Remove the two screws (1) that secure the board to the computer.
8.Disconnect the cables from the board (2).
NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on the wires.
