HP Pro 110 manual Computer Setup-Boot

Models: Pro 110

1 93
Download 93 pages 7.49 Kb
Page 18
Image 18

Table 3-3Computer Setup—Power

Option

Description

 

 

After AC Power

Allows you to select system restart behavior after power loss:

Failure

Stay Off (default)

 

 

Power On

 

Auto

 

 

XD(Execute Disable)

Disables/enables XD bit. Default is enabled.

 

 

Virtualization

Allows you to enable/disable the virtualization features of the processor. Changing this setting

Technology

requires turning the computer off and then back on. Default is disabled.

 

 

WOL in S5

Allows you to enable/disable limited (normal shutdown) WOL from S5 support. Default is disabled.

 

 

 

Computer Setup—Boot

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 3-4Computer Setup—Boot

Option

Description

 

 

Boot-time Diagnostic

Disables/enables POST diagnostic messages display. Default is disabled.

Screen

 

 

 

 

ESC: Boot Menu

Enables/disables the ability to press the Esc key to access the boot menu during boot.

 

 

F9: Diagnostics

Enables/disables the ability to press the F9 key to access the Diagnostics menu during boot.

 

 

F10: Setup

Enables/disables the ability to press the F10 key to access the Setup menu during boot.

 

 

F11: Recovery

Enables/disables the ability to press the F11 key to access the recovery menu during boot.

 

 

F12: Boot from LAN

Enables/disables the ability to press the F12 key to boot from LAN.

 

 

Boot Device Priority

Allows you to specify which device groups will boot first, second, third, and fourth or to disable any

1st Boot Device

of the four:

Floppy Group

2nd Boot Device

CD-ROM Group

3rd Boot Device

Hard Drive Group

4th Boot Device

Network Boot Group

 

 

NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating

 

system has started.

 

 

Floppy Group Boot

Specifies boot device priority within removable devices.

Priority

Press Enter to select the device, up or down arrow to move the selected device, Enter to select

 

 

the device, Esc to abort.

 

 

CD-ROM Group Boot

Specifies boot device priority within CD/DVD drives.

Priority

 

 

 

 

 

10 Chapter 3 Computer Setup (F10) Utility

Page 18
Image 18
HP Pro 110 manual Computer Setup-Boot