System Board

Description

Spare part number

 

 

System board

648965-001

 

 

Thermal pad, DIMM (20mm x 50mm x 2.5mm)

651595-001

 

 

Thermal pad, VRM (15mm x 40mm x 4mm)

651596-001

 

 

To remove the system board:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).

2.Remove the small rear cover (see Small Rear Cover on page 28).

3.Remove the stand (see Stand on page 29).

4.Remove the right rear cover (see Right Rear Cover on page 35).

5.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).

6.Remove the rear cover (see Rear Cover on page 46).

7.Remove the system board shield (see System Board Shield on page 51).

8.Disconnect all cables from the system board, noting their location for reinstallation.

9.Remove the six screws (1) that secure the system board to the computer.

10.Disconnect any cables still connected to the system board, noting their location for re- connection.

56 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis

Page 64
Image 64
HP Pro 110 manual System Board