WLAN Module
Description | Spare part number |
|
|
WLAN module (802.11b/g/n) (1x1 mini card) | |
|
|
The WLAN module is connected to the system board. The module is secured with two screws and has one connected antenna.
To remove the WLAN module:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Position the computer with the rear facing you.
3.Remove the small rear cover (see Small Rear Cover on page 28).
4.Remove the stand (see Stand on page 29).
5.Remove the right rear cover (see Right Rear Cover on page 35).
6.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
7.Disconnect the antenna cable from the module, and then remove the screws that secure the module to the computer.
