Webcam Module
Description | Spare part number |
|
|
Webcam module |
|
|
|
The webcam module is located at the top of the computer. It is located below an upper cover, is secured with two screws, and has one connector.
To remove the webcam module:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Position the computer with the top rear facing you.
3.Remove the small rear cover (see Small Rear Cover on page 28).
4.Remove the stand (see Stand on page 29).
5.Remove the right rear cover (see Right Rear Cover on page 35).
6.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
7.To remove the upper cover that allows access to the webcam, remove the two screws (1) that secure the cover to the computer, and then rotate the cover up and off the computer (2).
