The phone cord that came with my HP All-in-One is not long enough

Solution If the phone cord that came with the HP All-in-One is not long enough, you can use a coupler to extend the length. You can purchase a coupler at an electronics store that carries phone accessories. You will also need another phone cord, which can be a standard phone cord that you might already have in your home or office.

Tip If the HP All-in-One came with a 2-wire phone cord adaptor, you can use it with a 4-wire phone cord to extend the length. For information on using the 2-wire phone cord adaptor, see the documentation that came with it.

To extend your phone cord

1.Using the phone cord supplied in the box with the HP All-in-One, connect one end to the coupler, then connect the other end to the port labeled 1-LINE on the back of the HP All-in-One.

2.Connect another phone cord to the open port on the coupler and to the telephone wall jack, as shown below.

1 Telephone wall jack

2 Coupler

3Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port

Operational troubleshooting

This section contains information on paper and print cartridge troubleshooting.

The troubleshooting section in the onscreen Help contains more complete troubleshooting tips for some of the most common issues associated with the HP All- in-One. For more information, see Use the onscreen Help.

If you have Internet access, you can get help from the HP website at www.hp.com/ support. The website also provides answers to frequently asked questions.

Paper troubleshooting

To help avoid paper jams, only use paper types that are recommended for the HP All- in-One. For a list of recommended papers go to www.hp.com/support.

Troubleshooting

User Guide

127