Finish setup

Chapter 3

Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless Technology

The HP bt450, Printer and PC Adapter with Bluetooth® Wireless Technology allows you to print images from most Bluetooth devices to the HP All-in-One without a cable connection. Simply insert the HP bt450 into the front USB port and print from a Bluetooth device such as a PDA or camera phone.

Note You can also use Bluetooth technology to print from a computer to the HP All-in-One.

To connect the HP bt450 to the HP All-in-One

1.Insert the HP bt450 into the front USB port (shown in the graphic below).

2.Some Bluetooth devices exchange device addresses when they communicate with each other and establish a connection. Also, some Bluetooth devices display the name of the printer when connected. If you do not want the default name displayed as the name of the HP All-in-One, you can change the device name. Do the following, as appropriate:

To find out the device address of the HP All-in-One

a.Press Setup.

b.Press 9, and then press 1.

This selects Bluetooth and then selects Device Address. The Device Address appears, which is read only.

c.To enter the address into your device, follow the instructions that came with your Bluetooth device.

To change the device name of the HP All-in-One from the default

a.Press Setup.

b.Press 9, and then press 2.

This selects Bluetooth and then selects Device Name.

Note The HP All-in-One ships with the predefined name of "Officejet 6300 Series".

c.Use the keypad to enter a new name.

d.When you have finished entering a name for the HP All-in-One, press OK.

24

HP Officejet 6300 All-in-One series