Note Digital cameras that are in storage mode can be attached to the front USB port. The HP
Check your camera documentation to verify how to change the USB mode to storage mode. Different cameras use different terms to describe the storage mode. For instance, some cameras have a digital camera setting and a disk drive setting. In this instance, the disk drive setting is the storage mode setting. If storage mode does not work on your camera, you might need to upgrade the camera firmware. For more information, see the documentation that came with the camera.
Once you have connected the storage device, you can do the following with the files stored on your storage device:
●Transfer the files to your computer
●View photos
●Edit photos and videos using the control panel
●Print photos on the HP
●Send photos and videos to your friends and family
Caution Never attempt to disconnect a storage device while it is being accessed. Doing so can damage files on the storage device. You can safely remove a storage device only when the status light next to the memory card slots is not blinking.
Select photos and videos for printing
You can use the control panel on the HP
To select individual photos and videos
1.Insert a memory card into the appropriate slot on the HP
2.In the Photo area, press Menu repeatedly until Select Photos appears.
3.Press to select Custom, and then press OK.
4.Press or to scroll to the photo or video file you want to select.
Note From the control panel on the HP
videos and Photos
User Guide | 87 |