Finish setup

Chapter 3

Note In some countries/regions, the date and time stamp on the fax header is a legal requirement.

If the HP All-in-One loses power for more than 72 hours, you might need to reset the date and time.

To set the date and time

1.Press Setup.

2.Press 6, and then press 3.

This selects Tools and then selects Date and Time.

3.Enter the month, day, and year by pressing the appropriate numbers on the keypad. Depending on your country/region setting, you might enter the date in a different order.

4.Enter the hours and minutes.

5.If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM. The new date and time settings appear on the display.

Adjust the volume

The HP All-in-One provides three levels for adjusting the ring and speaker volume. The ring volume is the volume of the phone rings. The speaker volume is the level of everything else, such as the dial tones, fax tones, and button press beeps. The default setting is Soft.

To adjust the volume from the control panel

1.Press Setup.

2.Press 4, and then press 4 again.

This selects Basic Fax Setup and then selects Ring and Beep Volume.

3.Press to select one of the options: Soft, Loud, or Off.

4.Press OK.

Connection information

You can use the HP All-in-One as a stand-alone copier, fax machine, and photo printer, or you can connect the HP All-in-One to a computer or bluetooth device to enable printing and other software features. The different connection options available to you are described in the following sections.

●Supported connection types

●Connect using a USB cable

●Connect using Ethernet

●Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless Technology

●Set Bluetooth security for the HP All-in-One

●Use a Bluetooth® connection to print from your computer

●Use printer sharing

22

HP Officejet 6300 All-in-One series