To receive a fax manually
1.Make sure the HP
2.Remove any originals from the document feeder tray.
3.Set the Rings to Answer setting to a high number to allow you to answer the incoming call before the HP
4.If you are currently on the phone with the sender, instruct the sender to press Start on their fax machine.
5.When you hear fax tones from a sending fax machine, do the following:
a.Press Start Fax Black or Start Fax Color on the control panel of the HP All-
b.When prompted, press 2 to select Fax Receive.
c.After the HP
If you are not close enough to the HP
After the HP
Depending on your preference and security requirements, you can set up the HP All-
The following Backup Fax Reception modes are available:
On | The default setting. When Backup Fax Reception is On, the |
| HP |
| enables you to reprint up to eight of the most recently printed |
| faxes if they are still saved in memory. |
| Note 1 When the memory gets low, the HP |
| overwrites the oldest, printed faxes as it receives new faxes. If |
| the memory becomes full of unprinted faxes, the HP |
| will stop answering incoming fax calls. |
| Note 2 If you receive a fax that is too large, such as a very |
| detailed color photo, it might not be stored in memory due to |
| memory limitations. |
|
|
Fax
User Guide | 75 |