Chapter 3

What you need for a wired network

Before you connect the HP All-in-One to a network, make sure you have all of the required materials.

❑A functional Ethernet network that includes an Ethernet router, switch, or a wireless router with Ethernet ports.

❑CAT-5 Ethernet cable.

Finish setup

Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable. There is a different number of wires in each one, and each has a different connector. An Ethernet cable connector (also called an RJ-45 connector) is wider and thicker and always has 8 contacts on the end. A phone connector has between 2 and 6 contacts.

❑A desktop computer or laptop with a connection to the Ethernet or wireless router.

Note The HP All-in-One supports both 10 Mbps and 100 Mbps Ethernet networks. If you are purchasing, or have purchased, a network interface card (NIC), make sure it can operate at either speed.

❑HP recommends Broadband Internet access such as cable or DSL. Broadband Internet access is required if you want to access HP Photosmart Share directly from the HP All-in-One.

Connect the HP All-in-One to the network

An Ethernet port is provided on the back of the HP All-in-One.

To connect the HP All-in-One to the network

1.Remove the yellow plug from the back of the HP All-in-One.

30

HP Officejet 6300 All-in-One series