
Change network settings
From the printer control panel, you can set up and manage your printer wireless connection and perform a variety of network management tasks. This includes viewing and changing network settings, restoring network defaults, and turning the wireless function on or off.
●View and print network settings
CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user, you should not change some of these settings (such as the link speed, IP settings, default gateway, and firewall settings).
To view or print network settings, use one of the following ways:
● | From the printer control panel, touch | (Wireless) or | (Ethernet). The network status screen |
| is displayed. |
|
|
●Print the network configuration page. For more information, see Network configuration page on page 126.
●Run the wireless test. For more information, see Step 3: Run the wireless test on page 151. To access the software, see Open the HP printer software (Windows) on page 37.
Set link speedYou can change the speed at which data is transmitted over the network. The default is Automatic.
1.From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup.
2.Touch Ethernet Settings.3.Select Advanced Setup.4.Touch Link Speed.5.Touch the appropriate option that matches your network hardware.
Change IP settingsThe default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an advanced user and want to use different settings (such as the IP address, subnet mask, or the default gateway), you can change them manually.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the installation, your network components cannot connect with the printer.
1.From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup.
2.Touch Ethernet Settings or Wireless Settings.3.Touch Advanced Setup.4.Touch IP Settings.ENWW | Change network settings 109 |