
NOTE: For better experience, load only one type of paper in a tray.
NOTE: Tray 2 supports only plain paper.
To achieve this | Follow these steps |
|
|
Have paper loaded in both trays and use paper from one tray | ● Load paper in both trays. For more information, see |
if the other tray is empty. | |
| ● Turn off tray lock. |
|
|
Have paper loaded in both trays and use paper from one of | ● Load paper in both trays. |
the trays first. | ● Set the desired tray as the default tray. |
| |
|
|
Be able to choose from plain paper and another paper type | ● Load special paper in main input tray and plain paper in |
that you use occasionally. | Tray 2. |
NOTE: For better experience, load only one type of paper | ● Lock the main input tray and set Tray 2 as the default |
in a tray. | tray. |
|
|
To change tray settings
NOTE: You can also change the tray settings from the printer software or EWS.
To access EWS and the printer software, see Embedded web server on page 118 and Open the HP printer software (Windows) on page 37.
1.Make sure the printer is turned on.
2.Make sure you have turned on automatic selection of paper source.
3.From the printer control panel display, touch and slide your finger across the screen and touch Setup.
4.Touch Tray Setup, touch Default Tray or Tray Lock, and then select the appropriate option.
To turn on automatic selection of tray or paper source (Windows)
1.Depending on your operating system, do one of the following:
●Windows 8: On the Start screen, click Control Panel, click View devices and printers; right- click the printer icon, and then click Printing preferences.
●Windows 7: Click Start, click Devices and Printers;
●Windows Vista and Windows XP: Click Start, click Printers or Printers and Faxes;
2.On the Printing preferences tab, click the Paper/Quality tab.
3.Select Printer Auto Select from the Paper Source
4.Click OK twice to close the pages and accept changes.
32 Chapter 2 Get started | ENWW |