5.(Optional) If your answering machine does not have a
NOTE: If your answering machine does not let you connect an external phone, you can purchase and use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone to the printer. You can use standard phone cords for these connections.
6.If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes.
7.Turn on the Auto Answer setting.
8.Set your answering machine to answer after a low number of rings.
9.Change the Rings to Answer setting on the printer to the maximum number of rings supported by the product. (The maximum number of rings varies by country/region.)
10.Run a fax test.
When the phone rings, your answering machine answers after the number of rings you have set, and then plays your recorded greeting. The printer monitors the call during this time, "listening" for fax tones. If incoming fax tones are detected, the printer emits fax reception tones and receives the fax; if there are no fax tones, the printer stops monitoring the line and your answering machine can record a voice message.
If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance.
Shared voice/fax line with computer DSL/ADSL modem and answering machine
1 | Telephone wall jack |
|
|
2 | Parallel splitter |
|
|
3 | DSL/ADSL filter |
|
|
4 | Phone cord provided with the printer connected to the |
| You might need to connect the supplied phone cord to the adapter provided for your country/ |
| region. |
|
|
5 | DSL/ADSL modem |
|
|
6 | Computer |
|
|
ENWW | Set up faxing (parallel phone systems) 199 |