HP Promo 800 G1 E1Z82UTABA, Promo 800 G1 E1Z80UTABA, E2A03UT E2A03UT#ABA manual Power supply

Power supply

Description	Spare part number
Power supply, 200W	733490-001

The power supply is located in the middle of the computer under the VESA mounting plate. It is secured with two Torx screws and has one connector routed to the system board.

To remove the power supply:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 35).

2.Remove the stand (see Stand on page 37).

3.Remove the access panel (see Access panel on page 41).

4.Remove the lower rear panel (see Lower rear panel on page 74).

5.Disconnect the cable from the system board connector (1).

6.Remove the two Torx screws (2) that secure the power supply to the computer.

86 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis