Chapter 1
connected through an optional HP Photosmart Premium camera dock or wireless dock base (see Using the Setup Menu on page 41).
Use 
to choose the region you want, then press
.
Set the date and time
Accurately setting the date and time will help you locate images once you have transferred them to your computer, and will ensure that images are accurately marked if you use the date and time imprint feature. See Date & Time Imprint under Using the Capture Menu on page 18.
1.Use 
to adjust the highlighted value.
2.Use 
to move to the other selections and repeat Step 1 until the date and time are set correctly.
3.Press 
when the date, time, and format settings
are correct, then press 
again to confirm.
To change the date and time later, use the Setup
Menu (see Using the Setup Menu on page 41).
Install and format an optional memory card
This camera supports standard and high speed,
1.Turn off the camera and open the Battery/Memory card door.
2. Insert the optional memory card in the smaller slot as shown. Make sure the memory card snaps into place.
3. Close the Battery/Memory card door and turn on the camera.
Always format new memory cards before first use. Formatting removes all images from the memory card,
so make sure to transfer existing images before formatting (see Transferring and printing images on page 33).
1.With the camera turned on, press 
until 
appears briefly in the upper right corner of the Image Display. This indicates you are in Playback.
2.Press 
.
3.Use 
to select Format Card, then press 
.
4.Use 
to select Yes, then press 
to format the card.
8