
Setting up online destinations in the camera
You can specify up to 34 custom destinations (such as individual
1.Verify that your computer is connected to the Internet.
2.Turn on the camera, then press ![]()
![]()
.
3.Highlight ![]()
Share, then press
. If you have already created destinations, highlight Share Menu Setup and press
again.
4.Connect the camera to your computer using the
USB cable that came with your camera. Follow the
5. Disconnect the camera from the computer, press ![]()
![]()
, then highlight Share and press
to verify that
the new destinations are now in the camera.
Sending images to online destinations
After you have set up online destinations in the camera, you can mark images to be sent to these custom destinations the next time you connect your camera to your computer.
1.Press ![]()
![]()
, use
and ![]()
to highlight Share, then press
.
2.In the Share
.
–Custom ![]()
.
–All
in the
want to send all Favorites, pressing
to select each destination. After selecting destinations, highlight EXIT and press
. This option is available only if you have tagged more than one image as a Favorite (see Tagging images as Favorites on page 37).
–All
in the
to select each destination. After selecting destinations, highlight EXIT and press
. This option is available only if you have more than one image in the camera.
3.To select additional images to share, use ![]()
to display an image, then repeat Step 2.
HP Photosmart R827 Digital Camera | 39 |