HP rx1620 manual Removing and Replacing a Removable Media Drive, Power Supply Cable

Figure 57 Power Supply Cable

6.Replace the power supply fan unit into the chassis.

7.Replace the cover.

Removing and Replacing a Removable Media Drive

The removable media drive is located between the two sections of the front bezel.

WARNING! Ensure that the system is powered-down and all power sources have been disconnected from the server prior to removing or replacing a removable media drive.

Voltages are present at various locations within the server whenever an AC power source is connected. This voltage is present even when the main power switch is in the off position.

Failure to observe this warning could result in personal injury or damage to equipment.

CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Failure to properly complete the steps in this procedure will result in erratic system behavior or system failure. For assistance with this procedure contact your local HP Authorized Service Provider.

Removing and Replacing a Removable Media Drive 61