1.Remove the following components from your existing base unit. Refer to earlier sections of this chapter for component removal and replacement instructions.
•Power Supply Fans
•Power Supply
•Chassis Fans
•Management Processor card (optional card, may be present)
•Management Processor Blank (present when Management Processor not installed)
•PCI I/O Backplane Assembly
•CPU(s) and associated Power Pods
•CPU Airflow guide (single CPU systems only)
•Memory DIMMs
•DVD or
•DVD Filler (present when a DVD or
•Disk(s)
•Disk Filler(s) (present on
•Display Panel
Figure 63
2.Install the previously removed components into the new base unit. Refer to earlier sections of this chapter for component removal and replacement instructions.
•Power Supply Fans
•Power Supply
•Chassis Fans
•Management Processor card (optional card, may be present)
