HP Stream - 11-d010nr, Stream - 11-d077nr manual Using HP PC Hardware Diagnostics Uefi

Models: Stream - 11-d010nr Stream - 11-d011wm Stream - 11-d010wm Stream - 11-d077nr

1 76
Download 76 pages 36.46 Kb
Page 68
Image 68

Using HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

To start HP PC Hardware Diagnostics UEFI:

1.Turn on or restart the computer, quickly press esc, and then press f2.

The BIOS searches three places for the diagnostic tools, in the following order: a. Connected USB drive

NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 58.

b.Hard drive

c.BIOS

2.When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostic test, press esc.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE: Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English only.

There are two options to download HP PC Hardware Diagnostics to a USB device: Option 1: HP PC Diagnostics homepage— Provides access to the latest UEFI version

1.Go to http://hp.com/go/techcenter/pcdiags.

2.Click the UEFI Download link, and then select Run.

Option 2: Support and Drivers page—Provides downloads for a specific product for earlier and later versions

1.Go to http://www.hp.com.

2.Point to Support, located at the top of the page, and then click Download Drivers.

3.In the text box, enter the product name, and then click Go.

– or –

Click Find Now to let HP automatically detect your product.

4.Select your computer model, and then select your operating system.

5.In the Diagnostic section, click HP UEFI Support Environment.

– or –

Click Download, and then select Run.

58 Chapter 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)

Page 68
Image 68
HP Stream - 11-d010nr Using HP PC Hardware Diagnostics Uefi, Downloading HP PC Hardware Diagnostics Uefi to a USB device