HP Thin Client t5500 On Line, Data Bits, Stop Bits, Local Echo, Transmit Rate

Setup Menus

In/Out - XON/XOFF on transmitted & received data

Hardware - DTR/CTS hardware flow control.

Data Bits

Factory default: 8

This option specifies the number of data bits sent for each transmitted character.

Stop Bits

Factory default: 1

This specifies the number of stop bits sent for each transmitted character.

Transmit Rate

Factory default: Unlimited

The setting of this option determines the maximum effective baud rate that the emulator transmits terminal reports and data sent as a result of pasting data to the host.

On Line

Factory default: Selected

When this option is selected, normal two-way communication between the emulator and the host is enabled. When unselected, the emulator is in Local mode and data will not be sent to, or received from the host. Data typed on the keyboard will be displayed on the screen or actioned if a control command is typed.

Local Echo

Factory default: Unselected

The setting of this option determines whether keyboard entered characters are displayed on the screen as well as sent to the host. When unselected, characters are not displayed when they are transmitted unless the host 'echoes' them back.

5-50