HP Thin Client t5500 PROGRAMMING FUNCTION KEYS

Host Command Summary

PROGRAMMING FUNCTION KEYS

Program Function Key(s) DCS " x D...D ST

where the data string D...D format is as follows:
Key1/Mod1/Function #/UDS/UDS Direction;
Key2/Mod2/Function #/UDS/UDS Direction;........	;

Key# Is the key station number of the key to be programmed as listed below:

Esc	110	F10	121	Page Up	85
F1	112	F11	122	Page Down	86
F2	113	F12	123	Cursor Left	79
F3	114	Print Screen	124	Cursor Right	89
F4	115	Scroll Lock	125	Cursor Up	83
F5	116	Pause	126	Cursor Down	84
F6	117	Insert	75	Keypad Enter	108
F7	118	Delete	76	Return	43
F8	119	Home	80	Backspace	15
F9	120	End	81	Tab	16

/Is a delimiter.

Mod#	Is an integer that specifies the modifier key that is to be pressed at
	the same time as the defined key:
	0 or none		Normal		5	Control
	1		Normal		6	Shift+Control
	2		Shift		7	Alt+Control
	3		Alt		8	Alt+Control+Shift
	4		Alt+Shift
Function #	Is a number associated with a local function as listed below. For
	example, function number "0" makes the key or key/modifier
	inoperative. Function number "100" indicates a user-defined
	sequence (UDS), and a UDS direction is defined following the
	slash "/" delimiter.
	0	No Function		91	Backspace		93	Escape
	100	UDS		92	Cancel		94	Delete
UDS	Is the user-defined sequence specified in Hex format. Each hex code
	in this string represents a value transmitted by the defined key
	combined with the modifiers.
UDS Direction	Specifies the transmission direction:
	0 or none		Normal (Host and/or terminal) default

1Local (Terminal only)

2Remote (Host only)

C-11