Getting Started

TCP/IP Connection Settings

The TCP/IP Telnet Configuration dialog box can be displayed from the Connection Wizard Host Information dialog box by setting the Connection Type to TCP/IP then clicking the Advanced button, or the New Connection dialog box when in non- WBT mode by selecting TCP/IP in the Type list box then clicking the Configure button.

Note that the options available and the default settings depend on the current terminal emulation.

Host Port Number

This enables you to specify the Telnet port number. The default Telnet port number, 23, can be substituted with any valid 16 bit port number. Specifying a number outside the valid range will cause the setting to default to 1.

Local Port Number

This enables you to specify the local Telnet port number if required. Setting this to 0 will cause the number to be allocated automatically.

Telnet Name

This enables you to override the name that will be reported for the terminal type over Telnet.

Enable Keep Alives

Selecting this option will prevent the session from being disconnected from the host by an inactivity timeout.

2-10