Setup Menus

Edit MenuClipboard TextClipboard Graphics

Selecting one of these options will enable selected text or graphics to be copied to the clipboard when the Copy command is used. The Paste and Select All commands will also be enabled. A tick will be displayed next to the option when it is selected.

Copy

The Copy commands become available when data has been selected. They will cause the currently selected text or graphics to be copied to the clipboard. The data can then be inserted in a different position or another file using the Paste command. The next block of data that is copied will delete the previous block on the clipboard.

The first Copy option enables you to perform a standard copy. The last three options are only available when Clipboard Graphics is selected. They enable you to copy the graphics image with black and white reversed, with colour converted to monochrome, or both.

Paste

This will cause data that has been copied to the clipboard to be pasted at the current cursor position. The same block of data may be pasted repeatedly as the clipboard stores it until the Copy command is used again.

Select All

This will cause the window contents (not the entire buffer) to be selected.

Clear Buffer

This will erase the contents of the window and the scroll buffer.

5-16