HP Thin Client t5500 Enter, Bell On, Bell On, Bell Column, Bell Column, Return Function

Setup Menus

Return Function

Factory default: Unselected

This option specifies whether or not the function of the Enter key is defined by the application when in Block mode. When selected, the key is regarded as an application specific function key. Normally this should be unselected.

Bell On

Factory default: Selected

This option enables or disables an audible tone which is heard when the emulation warns you about something. This needs to be selected when you want to use the Bell Column feature.

Bell Column

Factory default: 0

This option enables you to specify a particular column on the display which will cause an audible warning to sound when the cursor passes through it.

The valid range of column numbers is 1 to 80. Setting this option to 0 will disable the feature. The Bell On option must be selected for this feature to work.

5-38