Setup Menus

The HP 700-92/96emulation provides compatibility with software designed to drive the Hewlett Packard 700/92, 2392A, 2622A, 70094 and 70096 terminals. This emulation is described in detail in the HP 700-92/96 Emulation chapter.

The HZ1500 emulation provides compatibility with software designed to drive the Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals. Refer to the Wyse Emulations chapter for details.

The IBM 3151 emulation provides compatibility with software designed to drive the IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information on this emulation.

The IBM 3270 emulation provides compatibility with software designed to drive the IBM 3270 terminal. Note that the initial display will be an ASCII text screen known as Network Virtual Terminal mode (NVT mode for short). The setting of the IBM 3270 Model option in the IBM 3270 Settings dialog box determines the size of the display and whether or not extended attributes are supported. Refer to the IBM 3270 Emulation chapter for details.

The IBM 5250 emulation provides compatibility with software designed to drive IBM 5250 type alphanumeric terminals. This emulation can be used for connection to an IBM AS/400, System/36 or System/38. Note that the initial display will be an ASCII text screen known as Network Virtual Terminal mode (NVT mode for short). Refer to the IBM 5250 Emulation chapter for details.

Sco Console is an emulation of the SCO UNIX box.

The TA6530 emulation provides compatibility with software designed to drive the Tandem 6530 terminal. This emulation is described in the TA6530 Emulation chapter.

The TVI 910, TVI 920 and TVI 925 emulations provide compatibility with software designed to drive the TeleVideo 910+, 920 and 925 terminals, respectively, as emulated by the Wyse WY-50/50+/60 terminals. Refer to the Wyse Emulations chapter for details.

The TVI 950 and TVI 955 emulations provide compatibility with software designed to drive the TeleVideo 950 and 955 terminals, respectively.

The VT52 and VT100 emulations enable you to run applications written for the DEC VT52 and VT100 terminals, respectively. Refer to the DEC VT Emulations chapter for details.

The VT500 7-Bitand VT500 8-Bitemulations enable you to run applications written for the DEC VT320 terminal, the difference is in their treatment of 8-bit control codes. When VT500 7-Bitis selected, all 8-bit codes are converted to their 7-bit equivalents, whereas VT500 8-Bitleaves 8-bit codes unchanged. If you are using VT200 applications, select VT500 7-Bit. Refer to the DEC VT Emulations chapter for details.

The VT PCTerm emulation provides compatibility with software designed for the PC Term mode supported by DEC. This is the same as the VT510 emulation except that keyboard scan codes are sent on key press/release instead of ASCII codes by default.

5-20