IBM 5250 Emulation

keypad. The character N or L will be displayed on the status line to indicate which character set is currently active.

Selecting the Numeral Swap option in the IBM 5250 Settings dialog box will cause all numbers to be displayed using the National character set when in Latin character set mode.

Alternate Code Page

If a language supports two code pages (e.g. Hebrew New Code and Hebrew Old Code), you can switch between the two by pressing the keys Ctrl + Shift + Alt + - on the numeric keypad. This function can be assigned to a different key or key combination by using the AS_ALTCP virtual key name.

Record & Playback Keystrokes Facility

The record/playback keystrokes facility enables you to eliminate repetitive operations by using the Fn keys to store, retrieve and display data. The Fn keys can store a total of 1500 keystrokes. A sequence of recorded keystrokes may be interrupted so that keystrokes can be entered manually before continuing with the recording or playback. Note that local Fn key functions cannot be recorded.

The keys used to initiate recording and playback are shown below together with the equivalent virtual key names which can be used to assign the functions to any key on the keyboard:

 

101/102 Key Keyboard

Virtual Key Names

Record:

Alt + F4AS_RECORD

Pause:

Shift + Pause

AS_PAUSE

Quit:

Alt + LControl (see note)AS_QUIT

Play:

Alt + F5AS_PLAY
Note: Quit is Alt + Left Control if Left Control is defined as theReset key.

Recording Keystrokes

1.Press Record to enter Record mode.

The status line will display RECRD and a number from 0-1500indicating the number of new keystrokes that may be stored. A series of boxes displayed to the right represent the Fn keys. A solid box indicates that the Fn key in that position is currently storing recorded keystrokes.

10-9