HP Thin Client t5500 Shift, Mode Symbol, Typing Direction, Bilingual Keyboard Mode, NUM, Dup, Reset, Shift, Shift, SYSTEM, N or L, pressing the Reset key, pressing the Reset key

IBM 3270 Emulation

	Perform a cursor-select operation when the cursor is not in a
	valid cursor-select field.
	The keyboard can be unlocked and the indicator removed by
	pressing the Reset key.
SYSTEM	Indicates that you cannot enter any data because the application
	program has disabled the keyboard following an entry.
>	Indicates that you attempted to insert characters into an unpro-
	tected field when the cursor was at the end of the field, or you
	attempted to word wrap to the next line when there were not
	enough spaces to enable a word wrap.
	The keyboard can be unlocked and the indicator removed by
	pressing the Reset key.

Typing Direction

=> or <= This indicates the direction in which characters are displayed on the screen when typed. The direction is toggled between left-to- right (normal) and right-to-left by pressing the keys Shift + / on the keypad.

Bilingual Keyboard Mode

N or L	This indicates whether the National (N) or Latin (L) character
	set is active when a code page that supports a bilingual keyboard
	is selected. Pressing the keys Shift + - on the keypad will toggle
	between the two character sets.

Shift

NUM	This indicates that the numeric lock function is enabled and the
	current cursor is in a numeric field. When the numeric lock
	function is on, the current cursor is in an unprotected field and
	the keyboard is in lowercase shift, you can only use the 0 to 9,
	decimal sign (.), minus (-), and Dup keys.

Mode Symbol

^	This symbol indicates that the keyboard is in Insert mode. Al-
	ready existing characters to the right of the cursor will move to
	make room for new characters that are entered. Insert mode can

9-8