HP UX 11i v2 I/O Cards manual First 8-Channel multiplexer card in the ACC subsystem by

Installing the Data Analyzer

Configuring the Analyzer

	For example, you can set-up and run the analyzer on the first two ports
	of the first 8-Channel multiplexer card in the ACC subsystem by
	entering the runc command as follows:
	Display> runc 0 0
	All of the options that are applicable to the run command also apply to
	the runc command. See the entry for the runc command on page 37.
NOTE	For the 4-port cards and Z7340A 8-port PCI card, all channels can be
	monitored. For 8-port EISA and HP-PB cards, the ports used for data
	capture may NOT be used for active X.25 connections.

24 Chapter 2