Data Analyzer Commands

run

run

The run command starts the analyzer on a specified pair of ZLUs.

Format

run ZLU [-n filename] [-s filesize] [-l lcn#1 ..] -o {opts] -f

Description

The run command starts the analyzer running on a specified ZLU. It will automatically find the associated partner ZLU so that the correct DCE and DTE ZLUs are started together.

-n

Specify the capture file. If not given it will be defaulted

 

to /var/opt/acc/log/anz_ZLU.eve where ZLU is the

 

number specified in the command.

-s

Specify the maximum size of the capture file. If not

 

given, a default size of 1Mbyte will be used. Once this

 

file size is reached, the capture halts.

-o

Set the display options (refer to the options command

 

for details of option setting). Note the option settings

 

modified in this command will change the default

 

options for the next display command. These options

 

only have an immediate effect if the follow option is

 

used.

-f

Set follow mode. In this mode the capture is started

 

and then the program goes into display mode,

 

displaying the data as it is stored into the capture file.

 

The display mode uses the previously defined options

 

plus any modifications in a -ooption within this

 

command.

-l

Specify LCN masking for events to be stored into the

 

capture file. If no LCN masking is given then all X.25

 

L2 and L3 traffic is stored into the file. If masking is

 

specified then only L3 traffic with matching LCN

 

numbers is stored. A maximum of 6 LCN numbers may

 

be specified.

Chapter 3

35