Data Analyzer Commands
run
Specify level 2 or level 3 protocol for analysis and trace | |
| display. See the protocol command for specific details |
| on format for option |
Examples
To start the analyzer on ZLUs 19 and 20 use the command:
run 19
The command run 20 would have the same effect. In this example the default file name would be /var/opt/acc/log/anz_19.eve. If run 20 had been used the file name would have been /var/opt/acc/log/anz_20.eve, but the data captured would have been the same.
Display> run 19
Analyzer on ZLUs 19 and 20 started OK
To start the analyzer with LCN filtering for LCN numbers 120, 139, and
200 use the following command:
Display> run 19
Analyzer on ZLUs 19 and 20 started OK
36 | Chapter 3 |