Before Installing HP DCE/9000 Version 1.7
Prerequisites
Prerequisites
Hardware and Software Requirements
Any HP system that you want to make a member of a cell must meet certain hardware and software requirements. The system requirements are:
System Type | HP 9000 Series 700 or Series 800. |
Operating |
|
System | |
Kernel |
|
Configuration | See “Series 700 and 800 Kernel Parameter |
| Recommendations” in this chapter for recommended |
| kernel parameter settings. |
| You can check and, if necessary, change these values |
| via SAM (the |
| Manager). |
Memory | A minimum 32 Mb of memory is recommended for |
| |
Swap Space | A minimum 50 Mb of swap space is recommended for |
| |
| for systems running one or more DCE servers. Device |
| swap is strongly recommended over file system swap. |
File System | HP DCE/9000 must be installed on a |
| system. If you have a |
| first run convertfs(1m) to convert your file system to |
| long names. |
Series 700 and 800 Kernel Parameter Recommendations
Planning and Configuring HP DCE 1.7 |