Configuring HP DCE Cells

Configuring Cells with DCM

3. Select (double click on) DCE Cell Management.

4. Select (double click on) DCE Configuration Manager.

In a configured and running cell, if the primary DCE services (Initial CDS and Master Security) are running on HP systems (as opposed to other vendors’ systems), you can configure additional HP DCE 1.2, 1.2.1, 1.3.1, 1.4, 1.4.1, 1.4.2, 1.5, 1.6, or 1.7 clients into the cell from any HP DCE 1.7 cell member system.

 

Online Help for DCM

 

Comprehensive, context-sensitive online help is provided for DCM, as it

 

is for all functional areas of SAM. Consult the online help for details

 

about using DCM; detailed information about DCM is not provided here

 

or in a separate manual.

 

The DCM online help assumes a basic familiarity with DCE terms and

NOTE

 

concepts, as described in the manual Introduction to DCE.

 

To access the DCM online help, select (single click on) the DCE

 

 

Configuration Manager icon in SAM. Then press F1. Alternatively,

 

open (double click on) DCE Configuration Manager, and then select

 

“Introduction to Cell Configuration.”

 

For informatoin about using the SAM online help system, use the Help

 

pulldown menu on the SAM screen.

Printing the DCM Online Help

You can print the DCM online help from CDE. The help, however, is not formatted as it is on the screen: only text is printed (graphics are not printed).

You can print individual help topics within DCM online help using the Print button on a help topic screen.

You can use the -dthelpprintcommand at a shell prompt to print the entire help volume. The full pathname of the DCM help volume is:

/opt/dce/lib/dcm/C/help/dceconf.sdl

On ASCII terminals, you can only use the dthelpprint command; the print button is not available. See the dthelpprint (1X) man page for more information.

5-6

Planning and Configuring HP DCE 1.7