Activating
TIMEOUT — Timeout (in seconds) on communications with authentication technology. Default values are:
WARNPWDEXP — Password expiration warning period (in days). If the user’s password is due to expire within the specified number of days, the user receives a warning message during login. This parameter applies to DCE technology only. If this parameter is not specified, no warning is given.
FORCEPWDCHANGE — Password
FORWARDABLETGT — Enable DCE TGT to be forwardable. When forwarding a user’s DCE TGT from machine A to machine B, it enables the user from machine A to reuse its Kerberos credentials on machine B. A parameter value is required, but its content is ignored. This parameter applies to DCE technology only.
Default values are used when no parameter values are specified.
The following example commands activate
/usr/sbin/auth.adm
Configuration is set to log in the user upon successful password verification by DCE. If DCE is not available, login is effected via /etc/passwd. Note that this strategy works only if the
/usr/sbin/auth.adm
Configuration is set to log in the user upon successful password verification by /etc/passwd. This configuration specifies that after machine access has been granted, a DCE login should also be performed.
Planning and Configuring HP DCE 1.7 |