Configuring HP DCE Cells
Note for Users of
Note for Users of
At
1.Before configuring HP DCE/9000, stop any servers for
2.Stop glbd (via drm_admin “stop”) if it is running.
3.Stop llbd (via kill(1)).
4.Configure HP DCE/9000.
5.If DCE is configured, proceed to step 6.
If DCE is not configured, the script /sbin/init.d/ncs starts NCS services if they are configured. (NCS is configured if START_LLBD=1 in /etc/rc.config.d/ncs.)
6.Restart any servers for
Planning and Configuring HP DCE 1.7 |