NOTE

Before Installing HP DCE/9000 Version 1.7

Overview

Overview

The following is a brief overview of the HP DCE installation process:

If you are performing an upgrade rather than a new installation, see Chapter 2, “Migrating to HP DCE 1.7”.

•Verify that hardware and software prerequisites are met at your site.

•Plan where you will install various HP DCE filesets.

•Load HP DCE software from media to a network distribution area.

•Install filesets on individual systems.

•If necessary, remove unwanted filesets using swremove.

3-2

Planning and Configuring HP DCE 1.7